Day : 9/3/2014 (71) | Session : TT4 - Design and related problems (57) | | 11:20 | GD-000108 | Torque Ripple Reduction in 12-slot 10-pole Fractional Slot Permanent Magnet Synchronous Motors with Non-Overlapping Windings by Implementation of Unequal Stator Teeth Widths | Ilya Petrov, Pavel Ponomarev, Juha Pyrhönen | LUT | Finland | | 11:20 | GD-000329 | Study of Losses in Permanent Magnet Couplings due to Highly Conductive Walls | Thomas Matsumoto, Ivan Chabu | Universidade de São Paulo | Brazil | | 11:20 | GD-000485 | An algorithm for the filling factor calculation of electrical machines standard slots | Nick Raabe | Sterling Industry Consult GmbH | Germany | | 11:20 | GD-001015 | Optimization Methods Evaluation for the Design of Radial Flux Surface PMSM | Yannis L Karnavas, Christos D Korkas | Democritus University of Thrace | Greece | | 11:20 | GD-001082 | Novel cooling methods using Flux-barriers | Alexander Nollau, Dieter Gerling | Universität der Bundeswehr München | Germany | | 11:20 | GD-001163 | Torque Ripple Reduction in Double-Layer 18/16 TC-PMSMs by Adjusting Teeth Widths to Minimize Local Saturation | Pavel Ponomarev, Ilya Petrov, Juha Pyrhönen | LUT | Finland | | 11:20 | GD-001244 | Multiobjective Optimization of IPM synchronous motors using Response Surface Methodology and filtered Monte Carlo approach | Robert Seifert, Ramon Bargallo | EUETIB-UPC | Spain | | 11:20 | GD-002399 | A Multi-physics Multi-objective Optimal Design Approach of PM Synchronous Machines | Osama Mohammed, Ali Sarikhani | Florida International University | USA | | 11:20 | GD-002402 | Design and Characteristic Analysis for New Structure of Bone Conduction Speaker | Koya Yoshikawa, Wataru Kitagawa, Takaharu Takeshita | Nagoya Institute of Technology | Japan | | 11:20 | GD-002453 | Experimental Verification of Proposed Electromagnetic Clutch Structure for Surge Voltage Suppression | Junya Muramatsu, Takashi Kojima, Hiroya Tanaka, Yoshiyuki Hattori, Hiroshi Okada, Hiroki Keino, Takashi Nakanishi, Keisuke Fujisaki | Toyota Central R&D Labs., Inc. | Japan | | 11:20 | GD-002526 | Design of a Traction Motor with Two-Step Gearbox for High-Torque Applications | Juho Montonen, Simo Sinkko, Pia Lindh, Juha Pyrhönen | Lappeenranta | Finland | | 11:20 | GD-002925 | Losses due to transverse flux in axial flux permanent magnet synchronous machines | Bart Scheerlinck, Peter Sergeant, Herbert De Gersem | Ghent University | Belgium | | 11:20 | GD-002976 | Effects of Loading on Radial Magnetic Forces in Low-Speed Permanent Magnet Machine with Concentrated Windings | Mostafa Valavi, Arne Nysveen, Robert Nilssen | Norwegian University of Science and Technology (NTNU) | Norway | | 11:20 | GD-003263 | Thermal Performance analysis of the double sided-Linear Switched Reluctance Motor | Jordi Garcia Amoros, Ramon Bargallo Perpiña, Pere Andrada, Baldui Blanque | University Rovira i Virgili | Spain | | 11:20 | GD-003379 | Stator Thermal Model for Short-Time Thermal Transients | Aldo Boglietti, Enrico Carpaneto, Marco Cossale, Alex Lucco Borlera | Politecnico di Torino | Italy | | 11:20 | GD-003433 | New Analytical Method for PMSM Magnet Losses Estimation based on Fourier Series | Alejandro Rodríguez, Damián Gómez, Irma Villar, Amaia López-de-Heredia, Ion Etxeberria-Otadui | IK4-IKERLAN | Spain | | 11:20 | GD-003441 | Improved Analytical Multiphysical Modeling of a Surface PMSM | Alejandro Rodríguez, Damián Gómez, Irma Villar, Amaia López-de-Heredia, Ion Etxeberria-Otadui | IK4-IKERLAN | Spain | | 11:20 | GD-003875 | An effect of Electromagnetic Force on Acoustic Noise of Axial-gap In-wheel SR Motor | Takahiro Tokita, Hiroki Goto, Osamu Ichinokura | Graduate School of Engineering, Tohoku University | Japan | | 11:20 | GD-004006 | Improved Permeance Network Model for Embedded Magnet Synchronous Machines | Damián Gómez, Alejandro Rodríguez, Irma Villar, Amaia López-de-Heredia, Ion Etxeberria, Zi-Qiang Zhu | IK4-IKERLAN | Spain | | 11:20 | GD-004014 | Magnet Design Based on Transient Bahavior of an IPMSM in Event of Malfunction | Sicong Liu, Matthias Gregor, Kay Hameyer | RWTH Aachen/Daimler AG | Germany | | 11:20 | GD-004057 | Modeling and Reduction of Stator Teeth Eddy-Current Losses in IPM Machines | Julian Blum, Joerg Merwerth, Hans-Georg Herzog | BMW AG | Germany | | 11:20 | GD-004324 | Gradient Based Optimization of Permanent Magnet Generator Design for a Tidal Turbine | Astrid Røkke | Norwegian University of Science and Technology (NTNU) | Norway | | 11:20 | GD-004502 | Hysteresis Modelling of Brushless Exciters Using Finite Element Analysis | Peethamparam Anpalahan, Sorin G. Ilie, Christopher P. Riley, Alin D. Visian | Cobham Technical Services | United Kingdom | | 11:20 | GD-004766 | Identification of Three Phase Induction Machines Equivalent Circuits Parameters Using Multi-Objective Genetic Algorithms | Praveen Kumar, Ankit Dalal, Amit Kumar Singh | Indian Institute of Technology | India | | 11:20 | GD-005479 | Procedure For Fast Electromagnetic Design Of Axial Flux Permanent Magnet Machines | Werner Jara, Juan Tapia, Nicola Bianchi, Juha Pyrhönen, Rogel Wallace | University of Concepcion | Chile | | 11:20 | GD-005983 | Comparison of Time-Harmonic and Transient Finite Element Calculation of a Squirrel Cage Induction Machine for Electric Vehicles | Thomas Schuhmann, Bernd Cebulski, Stephan Paul | IAV GmbH | Germany | | 11:20 | GD-006467 | Flux Displacement in Rectangular Iron Sheets and Geometry-Dependent Hysteresis Loss | Florian Bachheibl, Dieter Gerling | Universität der Bundeswehr München | Germany | | 11:20 | GD-006629 | Comparison of no-load and load core losses for wide range of nominal power induction motors | Maria Dems, Krzysztof Komeza | Institute of Mechatronics and Information Systems Lodz University of Technology | Poland | | 11:20 | GD-006645 | Interactions between high and low frequency effects on iron losses | Lucian Petrea, Cristian Demian, Jean Francois Brudny, Thierry Belgrand | University of Artois - LSEE | France | | 11:20 | GD-006882 | Design Process of a High Torque Density Direct Drive Involving a Transverse Flux Machine | Jakob Jung | TU-Dresden | Germany | | 11:20 | GD-007064 | Permanent Magnet Synchronous Reluctance Machine - Design guidelines to improve the acoustic behavior | Sebastian Rick, Aryanti Putri, David Franck, Kay Hameyer | IEM - RWTH Aachen University | Germany | | 11:20 | GD-007161 | Influence of Ferromagnetic Bridges in d,q-Equivalent-Circuit Modeling of Interior Permanent-Magnet Machines | Bart Wymeersch, Frederik De Belie, Lieven Vandevelde, Claus Rasmussen, Finn Jensen | University Ghent | Belgium | | 11:20 | GD-007366 | Design of an electrical motor with wide speed range for the in-wheel drive in a heavy duty off-road vehicle | Svetlana Zhitkova, Matthias Felden, David Franck, Kay Hameyer | IEM RWTH Aachen University | Germany | | 11:20 | GD-007498 | Mechanical Construction and Analysis of an Axial Flux Segmented Armature Torus Machine | Bo Zhang, Yizhe Wang, Martin Doppelbauer | Karlsruhe Institute of Technology | Germany | | 11:20 | GD-007773 | Basics and Application of Motor-design Optimization in an Industrial Environment | Matthias Centner | Siemens AG | Germany | | 11:20 | GD-007811 | Optimal Number of Rotor Parameters for the Automatic Design of Synchronous Reluctance Machines | Matteo Gamba, Gianmario Pellegrino, Francesco Cupertino | Gianmario Pellegrino | Italy | | 11:20 | GD-008451 | Performance improvement of a high-speed permanent magnet excited synchronous machine by flux-barrier modelling | Marco Hombitzer, Silas Elfgen, David Franck, Kay Hameyer | RWTH Aachen University | Germany | | 11:20 | GD-008761 | Comparative Study of Two Winding Configurations for a Double Stator Switched Reluctance Machine | Eva Cosoroaba, Wei Wang, Babak Fahimi | The University of Texas at Dallas | USA | | 11:20 | GD-009253 | Design of Variable Flux Permanent Magnet Machine for Reduced Inverter Rating | Maged Ibrahim, Pragasen Pillay | Concordia University | Canada | | 11:20 | GD-009512 | Analytical Model of an Inverter-Fed Electrically Excited Synchronous Motor Considering Saturation | Alexander K. Hartmann, Jan Güdelhöfer, Raimund Gottkehaskamp, Mario Pacas | University of Applied Sciences Düsseldorf, Dept. of Electrical Engineering | Germany | | 11:20 | GD-009547 | Magnetic Frequency Characteristics of Permanent Magnet for Arc-Shaped PM Motor | Aki Watarai, Keisuke Fujisaki, Shunya Odawara, Kohei Fujitani | Aichi Steel Corporation | Japan | | 11:20 | GD-009709 | Sizing Comparison of Axial Flux PM Motors, for Automotive Application | Antonino Di Gerlando, Giovanni Maria Foglia, Matteo Felice Iacchetti, Roberto Perini | Politecnico di Milano | Italy | | 11:20 | GD-009717 | Thermal Modeling for the Design and Check of an Axial Flux PM Motor | Antonino Di Gerlando, Giovanni Maria Foglia, Matteo Felice Iacchetti, Roberto Perini | Politecnico di Milano | Italy | | 11:20 | GD-009806 | Analytical calculation of induced EMF in PM machines with arbitrary arranged surface mounted magnets using winding function theory | Christian Schumann, Tobias Müller, Edgar Stein, Mario Pacas | University of Applied Sciences Kaiserslautern | Germany | | 11:20 | GD-010308 | Effective Switched Reluctance Drive Train in Unmanned Aerial Vehicles: Design Investigations | Christian Laudensack, Yevgen Polonskiy, Dieter Gerling | Institute of Electrical Drive and Actuators | Germany | | 11:20 | GD-010332 | Effective Switched Reluctance Drive Train in Unmanned Aerial Vehicles: Torque Investigations | Yevgen Polonskiy, Christian Laudensack, Dieter Gerling | Institute of Electrical Drive and Actuators | Germany | | 11:20 | GD-010405 | Flux Barrier and Skew Design Optimisation of Reluctance Synchronous Machines | E Howard, M.J Kamper, S Gerber | Student | South Africa | | 11:20 | GD-010537 | Development of a decentralized traction drive unit | Fabian Endert, Tobias Heidrich, Andreas Möckel, Ulf Schwalbe | TU Ilmenau, FG Kleinmaschinen | Germany | | 11:20 | GD-010871 | Comparison Of Hybrid Analytical Modelling And Finite Element Modelling For Pre-Design Purposes | Laoubi Yanis, Dhifli Mouheb, Amara Yacine, Barakat Georges | Greah | France | | 11:20 | GD-011096 | Electromagnetic Finite Element Design of Axial Flux Permanent Magnet Machines for Low Speed Applications | Angela Ferreira, Artur Costa | Polytechnic Institute of Bragança | Portugal | | 11:20 | GD-011428 | Performance Comparison of Tubular Linear Induction Motors with different Primary Windings Connections | Massimo Caruso, Giovanni Cipriani, Vincenzo Di Dio, Claudio Nevoloso, Rosario Miceli, Giuseppe Ricco Galluzzo | University of Palermo | Italy | | 11:20 | GD-011908 | Finite-Difference Time-Domain (FDTD) Algorithm for Multiblock Grids | Veronika Kraeck, Ingo Hahn | Chair of Electrical Drives and Machines, University of Erlangen-Nuremberg | Germany | | 11:20 | GD-011959 | Study on the Development of the Surface Magnet type Magnetic Gear. | Masaru Oka, Masato Enokizono | Oita university | Japan | | 11:20 | GD-011983 | Comparison of Outer Rotor Radial Flux and Axial Flux PM Motors for CMG Application | Hulusi Bülent Ertan, Necati ÇAğAn | ROKETSAN Missiles Inc. | Turkey | | 11:20 | GD-012319 | Development of An Electrical Steel Sheet Developed by Vector Magnetic Characteristic Control | Toshiya Kajiwara, Keiichiro Ooka, Masato Enokizono | Oita university | Japan | | 11:20 | GD-012408 | Contribution to Modeling of Parasitic Couplings for Predicting EMC Behavior of Electrical Machines | José Ioav Ramos, Jean-Marc Dienot, Paul-Etienne Vidal, Christophe Viguier, Bertrand Nogarède | Novatem SAS | France | | 11:20 | GD-011827 | Analysis of Innovative Design Variations for Double-Sided Coreless-Stator Axial-Flux Permanent-Magnet Generators in Micro-Wind Power Applications | Mihai CHIRCA, Stefan BREBAN, Claudiu OPREA and Mircea M. RADULESCU | Technical University of Cluj-Napoca | Romania | Session : TT5 - Condition monitoring, diagnosis and testing (14) | | 11:20 | GD-001759 | Effects of Unbalanced Voltage on the Steady-State Performance of a Five-phase Induction Motor With Three Different Stator Winding Connections | Mahmoud I. Masoud, Ayman S Abdel-khalik, Rashid Al-Abri | Author | Oman | | 11:20 | GD-012076 | Detection of Static Eccentricity Faults in AFPM Machine with Asymmetric Windings Using Vibration Analysis | Oladapo Ogidi, Paul Barendse, Azeem Khan | University of Cape Town | South Africa | | 11:20 | GD-000078 | Identification of the Broken Bar Fault in Induction Motors with Rotor Air Ducts Through the Torque Spectrum | Konstantinos N. Gyftakis, Sang Bin Lee, Joya C. Kappatou, Jose A. Antonino-Daviu | University of Patras | Greece | | 11:20 | GD-005614 | Condition monitoring of electrical machines using low computing power devices | Angel Sapena-Baño, Javier Martinez-Roman, Manuel Pineda-Sanchez, Ruben Puche-Panadero, Jordi Burriel-Valencia, Jose-Miguel Cortes-Lopez, Jose Roger-Folch | Universitat Politecnica de Valencia | Spain | | 11:20 | GD-001228 | Experimental Validation of MEC Modeling for Stator and Rotor Winding Faults in WRIMs | Reza Roshanfekr, Alireza Jalilian | IUST | Iran | | 11:20 | GD-004553 | Detection of the Short-Circuit Fault in the Stator Winding of Induction Motors through Neighboring Magnetic Field Harmonics | Virgiliu Fireţeanu, Patrick Lombard, Raphael Romary, Remus Pusca, Alexandru-Ionel Constantin | POLITEHNICA University of Bucharest | Romania | | 11:20 | GD-012351 | System for core fault detection of AC electric machines, based on magnetic field scanning | Witold Rams, Michał Rad | AGH University of Science and Technology, Krakow | Poland | | 11:20 | GD-012904 | The h-EXIN CCA for bearing fault diagnosis | Giansalvo Cirrincione, Miguel Delgado, Maurizio Cirrincione | University of Picardie Jules Verne | France | | 11:20 | GD-010197 | Fault Diagnosis of Induction Motors by Space Harmonics Analysis of the Main Air Gap Flux | Khalid Saad, Galina Mirzaeva | School of Electrical Engineering and Computer Science, University of Newcastle | Australia | | 11:20 | GD-007285 | Consideration of Rotor Eccentricity Effects in a Multi Body Dynamics Simulation using a Finite Element Based Circuit Model Approach | Martin Mohr, Oszkár Bíró, Franz Diwoky | Christian Doppler Laboratory for Multiphysical Simulation, Analysis and Design of Electrical Machines at the Institute for Fundamentals and Theory in Electrical Engineering | Austria | | 11:20 | GD-010898 | Motor Current Signal Analysis on Programmable Logic Controller | Angel Sapena-Baño, Juan Perez-Cruz, Ruben Puche-Panadero, Javier Martinez-Roman, Jordi Burriel-Valencia, Juan Lazaro-Garcia | Universitat Politecnica de Valencia | Spain | | 11:20 | GD-008117 | Electrical machine with permanent magnets as a vibration sensor - a test stand model | Bartłomiej Będkowski, Marcin Barański | Institute of Electrical Drives and Machines KOMEL | Poland | | 11:20 | GD-009776 | Stator Current Measurements as a Condition Monitoring Technology - The-State-of-the-Art | Bram Corne, Colin Debruyne, Patrick De Baets, Jan Desmet | University Ghent | Belgium | | 11:20 | GD-001937 | Rotor Fault Diagnosis Using External Search Coils Voltage Analysis | Ahcène Bouzida, Omar Touhami, Rachid Ibtiouen | Ecole Nationale Polytechnique | Algeria | Day : 9/4/2014 (65) | Session : SS - Electric motor and generator windings: design, performance and reliability (5) | | 09:00 | GD-004847 | A Free-Piston PM Linear Generator in Vernier Topology using quasi-Halbach-Excitation | Cornelius Bode, Henning Schillingmann, Markus Henke | TU Braunschweig | Germany | | 09:00 | GD-008303 | Analytical characterization of a Permanent Magnet Synchronous Machine with Fractional Slot Concentrated Windings | Jean François Brudny, Modobozi Amah Tchiou, Jean Philippe Lecointe, Alain Lacaze | LSEE laboratory | France | | 09:00 | GD-009318 | Design of a High Performance Servo Motor for Low Speed High Torque Application | Erkan Mese, Yusuf Yasa, Baris Ertugrul, Eyyup Sincar | Yildiz Technical University | Turkey | | 09:00 | GD-010707 | Analysis of a new topology of flexible PCB winding for slotless BLDC machines | Bruno Dehez, Francois Baudart, Yves Perriard | UCL | Belgium | | 09:00 | GD-011835 | Multi-layer Windings Effect on Interior PM Machines for EV Applications | Yawei Wang, Ronghai Qu, Jian Li | Huazhong University of Science and Technology | China | Session : SS - Multi-phase electrical machines and drives for the more-electric transport (5) | | 09:00 | GD-010472 | A Switched-Reluctance Motor for Aerospace Application | Marco Villani, Marco Tursini, Giuseppe Fabri, Lino Di Leonardo | Giuseppe Fabri | Italy | | 09:00 | GD-001953 | Overcoming the challenges of “drag torque” in a dual-lane actuator for an aircraft | Steve McDonald, Glynn Atkinson, Daniel Smith, Sana Ullah | Newcastle University | United Kingdom | | 09:00 | GD-004367 | Design and build-up of a high performance six-phase machine for an automotive application | Nils Domann, Markus Henke | Technische Universität Braunschweig, Institute for Electrical Machines, Drives and Traction | Germany | | 09:00 | GD-005568 | A Fast On-Board Integrated Battery Charger for Four-Motor EVs | Ivan Subotic, Martin Jones, Emil Levi | LJMU | United Kingdom | | 09:00 | GD-000663 | Predictive Control of Variable Frequency Brushless Excited Synchronous Generator for More Electric Aircraft Power System | Mohammed Alnajjar, Dieter Gerling | Universität der Bundeswehr München | Germany | Session : TT1 - Classical rotating field machines (26) | | 09:00 | GD-004405 | A comparison between stationary and transient analysis of electrical machines using 3D FEA | Bo Zhang, Jianlei Liu, Martin Doppelbauer | Karlsruhe Institute of Technology | Germany | | 09:00 | GD-008605 | Novel In-field Method to Estimate Mechanical Parameters in Induction Motor Driven Systems | Fernando J. T. E. Ferreira, Adalberto Correia, Fernando Lopes | Polytechnic Institute of Coimbra (IPC/ISEC) & Institute of Systems and Robotics (ISR-UC) | Portugal | | 09:00 | GD-001651 | Performance Optimization of Synchronous Reluctance Machines with Two Rotor Structures | Slimane Tahi, Rachid Ibtiouen, Said Mekhtoub | Ecole Nationale Polytechnique, Alger | Algeria | | 09:00 | GD-003069 | Dynamizing Electrical Machines Laboratories with Virtual Instruments: the U.P.V. experience | Javier Martinez-Roman, Jorge Tarín-Corachan, Juan Perez-Cruz, Manuel Pineda-Sanchez, Rubén Puche-Panadero, Angel Sapena-Baño, Martín Riera-Guasp, José Roger-Folch | Univ. Polit. Valencia | Spain | | 09:00 | GD-001686 | Analytic Calcultation of Magnetic Field and Electromagnetic Performances of Spoke Type IPM Topologies with Auxiliary Magnets | Kamel Boughrara, Rachid Ibtiouen, Noureddine Takorabet | Université de Khemis-Miliana (LESI) | Algeria | | 09:00 | GD-001317 | Evaluation of Surface Mounted PM Machine’s Parameters on Load Conditions Using Frozen Permeability Method. Part. II | Geyverson Paula, José Roberto Monteiro, Thales Almeida, Marcelo Santana, William Pereira | University of São Paulo | Brazil | | 09:00 | GD-006548 | A Rapid Virtual Model for Analysis of DC Motors with Single Coil Windings | Christoph Wolz, Benjamin Wüchner, Maximilian Greger, Joachim Kempkes, Uwe Schäfer | University of Applied Science Wuerzburg-Schweinfurt | Germany | | 09:00 | GD-006319 | Design of Soft Magnetic Composite based Modular Four Phase SRM for Electric Vehicle Application | Saurabh Nikam, Baylon Fernandes | Indian Institute of Technology Bombay | India | | 09:00 | GD-012777 | Low Loss of a Permanent Magnet Motor by applying Local Stress | Yuichiro Kai, Masato Enokizono | Oita University | Japan | | 09:00 | GD-000841 | Computation of induced voltages and currents in the field winding of wound-field synchronous machines under transient conditions | Johann Bacher, Michael Maier, Annette Mütze | Electric Drives and Machines Institute, Graz University of Technology | Austria | | 09:00 | GD-007358 | Synchronous Generator Model Taking Into Account the Non-Uniform Saturation of the Pole Shoes | Filip Kutt, Michal Michna, Grzegorz Kostro, Mieczyslaw Ronkowski | Gdansk University of Technology | Poland | | 09:00 | GD-001805 | Interpretation and Applicability of d-q Approach for Non-ideal Synchronous Machine | Mang Cai, Markus Henke, Wolf-Rüdiger Canders | TU Braunschweig | Germany | | 09:00 | GD-009563 | On the Analytical Estimation of the Airgap Field in Synchronous Reluctance Machine | Michele Degano, Alberto Tessarolo, Nicola Bianchi | University of Trieste | Italy | | 09:00 | GD-003255 | Evaluation of a switched reluctance motor with magnetic slot wedges | M'Hamed Belhadi, Guillaume Krebs, Claude Marchand, Hala Hannoun, Xavier Mininger | LGEP / Renault | France | | 09:00 | GD-012289 | Improved efficiency of DFIG wind energy conversion systems by operating in the rotor-tied configuration | Nicholas David, Dionysios Aliprantis | Purdue University | USA | | 09:00 | GD-010618 | Performance Analysis of a Large Hydro Generator after Disconnecting of Damaged Coils | Ana Aguiar, Arezki Merkhouf, Kamal Al-Haddad | ETS | Canada | | 09:00 | GD-005045 | Study of the Impact of Eccentricity in Large Synchronous Generator with Finite Elements | Hind Chit Dirani, Arezki Merkhouf, Anne-Marie Giroux, Kamal Al-Haddad | École de Technologie Supérieure | Canada | | 09:00 | GD-000302 | Modeling of Interior Permanent Magnet Synchronous Motors in the Six-Step Conduction Mode | Markus Harke | Hochschule Heilbronn | Germany | | 09:00 | GD-007757 | Synchronous Reluctance Machine Flux Barrier Design based on the Flux Line Patterns in a SolidRotor | Samer Yammine, Carole Henaux, Maurice Fadel, Sébastien Desharnais, Lionel Calegari | Laplace | France | | 09:00 | GD-001783 | Calorimetric and Input-Output Loss Determination of 90 kW SynRM | Lassi Aarniovuori, Jere Kolehmainen, Antti Kosonen, Markku Niemelä, Juha Pyrhönen | Lappeenranta University of Technology | Finland | | 09:00 | GD-009911 | Uncertainty in Motor Efficiency Measurements | Lassi Aarniovuori, Jere Kolehmainen, Antti Kosonen, Markku Niemelä, Juha Pyrhönen | Lappeenranta University of Technology | Finland | | 09:00 | GD-004693 | High-Speed Synchronous Machines: Magnetic Pulling Tensioning Forces Calculation Approach | Ilja Z. Boguslavskiy, Irina Yu. Kruchinina, Yuvenaliy Ph. Khozikov, Alexandr S. Lyubimtzev | Institute of Silicate Chemistry RAS | Russian Federation | | 09:00 | GD-005932 | Energy efficiency of hoisting motors | Anna-Kaisa Repo, Juho Montonen, Vitaliy Sizonenko, Pia Lindh, Juha Pyrhönen | Konecranes | Finland | | 09:00 | GD-008583 | Minimization of Torque ripple caused by a stator winding dissymmetry in a Surface Permanent Magnet Synchronous Machine (SPMSM) | El Mehdi Bahri, Remus Pusca, Driss Belkhayat, Raphael Romary | LSEE - Artois University | France | | 09:00 | GD-000396 | Sub-transients in PM synchronous generators with diode rectifier load | Manfred Stiebler | TU Berlin | Germany | | 09:00 | GD-004375 | Effects of pole number and rotor wedge design on unbalanced magnetic pull of the synchronous generator | Miroslav Petrinic, Stjepan Tvoric, Stjepan Car | KONCAR - Electrical Engineering Institute, Inc. | Croatia (Hrvatska) | Session : TT2 - Innovative machines and actuators (28) | | 09:00 | GD-000124 | Direct Drive HTS Wind Generator Design for Commercial Applications | Haran Karmaker, Mantak Ho, Edward Chen, Devdatta Kulkarni | TECO Westinghouse | United States | | 09:00 | GD-001074 | Optimization of the MMF Function of The Fractional Slot Concentrated Windings | Nassim Bekka, Mohammed-El-Hadi ZaÏM, Nicolas Bernard, Didier Trichet | IREENA, UNIVERSITY OF NANTES | France | | 09:00 | GD-001414 | Operating Characteristics Analysis of Cage-Rotor Induction Motor and Matrix-Rotor Induction Motor Using 3-D Finite Element Method | Y Kawase, T Yamaguchi, M Otsubo, Y Iwai, N Toida, K Sato | Gifu university | Japan | | 09:00 | GD-002577 | Multiple-Airgap Iron-Cored Direct-Driven Permanent Magnet Wind Generators | Mostafa Valavi, Alexey Matveev, Arne Nysveen, Robert Nilssen | Norwegian University of Science and Technology (NTNU) | Norway | | 09:00 | GD-002984 | A 3.7-kW Axial-gap Switched-reluctance Motor Robustly Designed by Using a Mathematical Model | Kenta Deguchi, Satoshi Sumita, Yuji Enomoto | Hitachi, Ltd. | Japan | | 09:00 | GD-003239 | Servo Flux Switching PM Machines | E Ilhan, T. L. Balyovski, J. J. H. Paulides, E. A. Lomonova | Eindhoven University of Technology | Netherlands | | 09:00 | GD-003344 | A Novel Analytical Approach and Finite Element Modelling of a BDFIM | Nils van der Blij, Tim Strous, Henk Polinder | TU Delft | Netherlands | | 09:00 | GD-003417 | Analysis of Different PM Machines with Concentrated Windings and Flux Barriers in Stator Core | Gurakuq Dajaku, Dieter Gerling | FEAAM | Germany | | 09:00 | GD-003522 | Analysis and Test of the Sensorless Capability of Induction Motors with Created Saliency | Damiano Mingardi, Nicola Bianchi, Luigi Alberti, Renzo Zeni | University of Padova | Italy | | 09:00 | GD-003883 | Contactless power supply for magnetically levitated elevator systems using a SMC hybrid actuator | Rüdiger Appunn, Kay Hameyer | RWTH Aachen University | Germany | | 09:00 | GD-004308 | Torque Ripple Alleviation of A Radial Magnetic Gearbox Using Step Skewing Approach | Hassan Zaytoon, Ayman Abdel-Khalik, Shehab Ahmed, Ahmed Massoud | Elect. Dept., Alexandria University, Egypt | Egypt | | 09:00 | GD-004537 | Design and Construction of a Low-Vibration Low-Leakage Field Motor | Sheppard Salon, Lale T. Ergene | RPI | USA | | 09:00 | GD-004707 | Comparative Study of Novel Synchronous Machines Having Permanent Magnets in Stator Poles | J. T. Shi, Z. Q. Zhu, D. Wu, X. Liu | University of Sheffield | United Kingdom | | 09:00 | GD-004723 | Influence of Flux Focusing on Electromagnetic Torque of Novel Biased Flux PM Machines | J. T. Shi, Z. Q. Zhu, D. Wu, X. Liu | University of Sheffield | United Kingdom | | 09:00 | GD-004758 | Design and causal modelling of a piezoelectric multi-actuators system used in forging processes | Thanh Hung Nguyen, Christophe Giraud-Audine, Michel Amberg, Betty Lemaire-Semail, Gabriel Abba, Régis Bigot | ENSAM | France | | 09:00 | GD-004898 | Double-rotor Ironless Radial Flux Permanent Magnet Machine | Gert Immelman Oosthuizen, Peter Jan Randewijk | Stellenbosch University | South Africa | | 09:00 | GD-004995 | Design for cogging torque reduction in Two-Degree-of-Freedom Cylindrical Actuator | Yuki Yoshida, Wataru Kitagawa, Takaharu Takeshita | Nagoya Institute of Technology | Japan | | 09:00 | GD-005118 | Influence of Gear ratio and Winding Pole Numbers on the Performances and Optimal Parameters of the Surface Permanent Magnet Vernier Machines | Leilei Wu, Ronghai Qu, Dawei Li | School of Electrical and Electronic Engineering, Huazhong University of Science and Technology | China | | 09:00 | GD-005797 | Theoretical Analysis of Synchronous Machines with Displaced Reluctance Axis | Patrick Winzer, Martin Doppelbauer | Karlsruhe Institute of Technology | Germany | | 09:00 | GD-005819 | MATRIX Motor with Individual Winding Current Control Capability for Variable Parameters and Iron Loss Suppression | Hiroki Hijikata, Kan Akatsu, Yoshihiro Miyama, Hideaki Arita, Akihiro Daikoku | Shibaura Institute of Technology | Japan | | 09:00 | GD-005894 | Design of Small-size Generator for Variable Speed Micro-hydroelectric Power Plants | Omar Bottesi, Luigi Alberti | free university of Bozen - Bolzano | Italy | | 09:00 | GD-006173 | Influence of End-Effects on Static Torque Performance of Misaligned Cylindrical Permanent Magnet Couplings | S Högberg, Hilary Hansen, Bogi B. Jensen, Flemming Buus Bendixen | Stig Hoegberg | Denmark | | 09:00 | GD-006521 | Optimization and Measurement of Eddy Current Damping Applied in a Tuned Mass Damper | T.A. van Beek, K.J.W. Pluk, J.W. Jansen, E.A. Lomonova | Eindhoven University of Technology | Netherlands | | 09:00 | GD-008613 | A Split Tooth Permanent Magnet Machine Design for High Torque Applications | Yasser Alamoudi | newcastle University | United Kingdom | | 09:00 | GD-010499 | Magnetic Gear Technologies: A Review | Pushman Tlali, Rong-Jie Wang, Stiaan Gerber | Stellenbosch University | South Africa | | 09:00 | GD-011118 | Analytical Approach Towards Quantitative Electrical Loss Analysis of Dual Three-phase Permanent Magnet Synchronous Motors | Aiswarya Balamurali, K. Lakshmi Varaha Iyer, Kannan Ramkumar, Narayan Kar | University of Windsor | Canada | | 09:00 | GD-011665 | On the use of spectral analysis of air-gap flux density in Permanent Magnet Bearingless Motors | Blaise Lapôtre, Noureddine Takorabet, Farid Meibody-Tabar, Ramdane Lateb, Joaquim Dasilva | UNiversité de Lorraine GREEN | France | | 09:00 | GD-012343 | Influence of Rotor Design and Geometric Parameter Variation on Global Performance of Brushless Doubly-Fed Reluctance Machines | Tiago Staudt, Frédéric Wurtz, Nelson Jhoe Batistela, Patrick Kuo-Peng | Grenoble Electrical Engineering Laboratory - G2ELAB | France | Session : TT3 - Electrical drives (1) | | 09:00 | GF-011924 | Overvoltage Analysis at the Terminals of Rotating-diode Bridges of Three-Stage Synchronous Machine | François Biais, Marc Tunzini, Mario Martinez, Jawad Karim, Stéphane Guguen | THALES A.E.S. | France | Day : 9/5/2014 (54) | Session : SS - Analytical modeling of electromagnetic devices (2) | | 09:00 | GD-008338 | Operation Analysis of Synchronous Reluctance Machine in Electric Power Generation | Roberto H. Moncada, Boris J. Pavez, Juan A. Tapia, Juha Pyrhönen | Universidad de La Frontera | Chile | | 09:00 | GD-005487 | Analytical Model of a Permanent Magnet Brushless DC Motor with non-linear ferromagnetic material | Ankit Dalal, Praveen Kumar | Indian Institute of Technology | India | Session : SS - Efficent and reliable hybrid and electric propulsion systems (5) | | 09:00 | GD-011185 | 12 Slot - 10 Pole Wound Synchronous Motor Design for ISG Applications | Bonkil Koo, Ilsu Jeong, Kwanghee Nam | POSTECH | Korea (South) | | 09:00 | GD-002151 | Modified DC-bus Voltage Balancing Algorithm for Three-Level Neutral Point Clamped PMSM Traction Inverter Drive with Low Power Factor | Abhijit Choudhury, Pragasen Pillay, Sheldon Williamson | PhD student | Canada | | 09:00 | GD-010634 | DefendHer: plug-in hybrid platform for cross-country vehicles and tractors | Antonio Matessich, Fabio Massimo Frattale Mascioli | POMOS University of Rome | Italy | | 09:00 | GD-006688 | Characterizing the Motorization of a Light Electric Vehicle through FEM and NVH Tests | Daniel Fodorean, Mathieu Sarrazin, Claudia Steluta Martis, Jan Anthonis, Herman Van der Auwerear | Technical University of Cluj-Napoca | Romania | | 09:00 | GD-007404 | Magnetic Circuit and Torque Analysis of a Brushless Transverse-Flux Dual Rotor Machine Used for HEVs | Ping Zheng, Quanbin Zhao, Jingang Bai, Bin Yu, Zhiyi Song, Jing Shang | 2 Yikuang Street, Nan Gang District, Harbin | China | Session : SS - Fault tolerant solutions in the design of electrical machines (3) | | 09:00 | GD-004987 | Multi-Resolution Analysis Based Data Compression for Power transformer protection | Adel Aktaibi | Memorial University of Newfoundland | Canada | | 09:00 | GD-009903 | Improving the fault tolerance of grid-connected synchronous generators through electromagnetic design | Davide Giulivo, Mauro Bortolozzi, Matteo De Martin | University of Trieste | Italy | | 09:00 | GD-003859 | Delta Connected Induction Motor Drive Analysis under Open Switch Converter Fault | Ioannis Pallis, Joya Kappatou | University of Patras | Greece | Session : SS - High speed machines and drives for industry applications (5) | | 09:00 | GD-001791 | Design of 6-slots 2-poles High-Speed Permanent Magnet Synchronous Machines with Tooth-Coil Windings | Nikita Uzhegov, Janne Nerg, Juha Pyrhönen | Lappeenranta University of Technology | Finland | | 09:00 | GD-003824 | 2D Analytical Torque Study of Slotted High-Speed PMSMs Considering Pole Pairs, Slots per Pole per Phase and Coil Throw | Bert Hannon, Peter Sergeant, Luc Dupré | Ghent University, Faculty of Engineering and Architecture | Belgium | | 09:00 | GD-002682 | Improving Dynamics of Vector Controlled IM Drive by Resampling SVM Under Low Frequency Ratio | Peter Stumpf, Rafael K. Járdán, István Nagy | Budapest University of Technology and Economics | Hungary | | 09:00 | GD-010111 | Speed Estimator in Closed-Loop Scalar Control Using Neural Networks | Tiago Henrique Santos, Alessandro Goedtel, Sérgio Augusto Oliveira Silva, Marcelo Suetake | Federal Institute of Paraná | Brazil | | 09:00 | GD-010375 | Study of a High-Speed Motorization for Electric Vehicle based on PMSM, IM and VRSM | Daniel Fodorean, Dan-Cristian Popa, Paul Minciunescu, Cristi Irimia, Lorand Szabo | Technical University of Cluj-Napoca | Romania | Session : SS - Hybrid excitation synchronous machines (2) | | 09:00 | GD-012858 | 3D Modeling of Double Excitation Synchronous Motor with Reluctance Network | Trung-Kien Hoang, Lionel Vido, Mohamed Gabsi, Frederic Gillon | SATIE, ENS Cachan | France | | 09:00 | GD-003573 | Multi-structure model to optimize a Hybrid Excitation Synchronous Generator | Maxime Ployard, Aymen Ammar, Juliana Iamamura, Frederic Gillon, Lionel Vido, Daniel Laloy | Maxime Ployard | France | Session : SS - Improvement in the energy efficiency of electric transformers and related smart practice (3) | | 09:00 | GD-001848 | Modeling of single-phase core type transformer | Faouzi Aboura, Sarah-Asma Touhami, Ahmed-Islam Zama, Redouane Tahmi, Omar Touhami | Ecole Nationale Polytechnique | Algeria | | 09:00 | GD-003743 | Hot Spots Mitigation on Tank Walls of Power Transformers using Electromagnetic Shields | S. Magdaleno-Adame, J. C. Olivares-Galvan, R. Escarela, O. Raichenko, A. Kladas | National Technical Univerrsity of Athens | Greece | | 09:00 | GD-010928 | Thermal Analysis of a Dry-Type Distribution Power Transformer Using FEA | Marco Arjona, Coni Hernandez, Rafael Escarela-Perez, Enrique Melgoza | Marco Arjona | Mexico | Session : SS - Monitoring, fault diagnosis and predictive maintenance in wind generators (2) | | 09:00 | GD-012564 | Fault-tolerant Control of Wound Rotor Synchronous Generator in Wind Turbines | Vinko Lesic, Mario Vasak, Goran Stojcic, Thomas M. Wolbank | University of Zagreb Faculty of Electrical Engineering and Computing | Croatia (Hrvatska) | | 09:00 | GD-011215 | Analytical Equations of the Current Excited Synchronous Machine | Konstantin Kanelis | European Patent Office | Netherlands | Session : SS - Recent industrial applications and case studies of electrical machine diagnosis & prognosis (9) | | 09:00 | GD-000205 | Taking Advantage of the Induction Motor Inherent Eccentricity Aiming to Discriminate the Broken Bar Fault from Load Oscillations | Konstantinos N. Gyftakis, Dionysios V. Spyropoulos, Joya C. Kappatou, Epaminondas D. Mitronikas | University of Patras | Greece | | 09:00 | GD-000353 | Evolution of High Order Fault Harmonics during a Bar Breakage with Compensation | Vicente Climente-Alarcon, Jose A. Antonino-Daviu, Ari Haavisto, Antero Arkkio | Aalto University | Finland | | 09:00 | GD-003131 | Electrical Fault Diagnosis for an Induction Motor Using an Electromechanical FE Model | Mehrnaz Farzam Far, Antero Arkkio, Janne Roivainen | Aalto University | Finland | | 09:00 | GD-005452 | Broken Rotor Bar Detection in VSD-fed Induction Motors at Startup by High-Resolution Spectral Analysis | Rene J. Romero-Troncoso, Daniel Morinigo-Sotelo, Oscar Duque-Perez, Roque A. Osornio-Rios, Mario A. Ibarra-Manzano, Arturo Garcia-Perez | Universidad de Guanajuato | Mexico | | 09:00 | GD-006785 | Design of Low-Voltage Induction Motor Diagnostic Using Oscillating Circuit | I.M.Y Negara, Pradika Sakti, D.A Asfani | Institut Teknologi Sepuluh Nopember | Indonesia | | 09:00 | GD-010685 | Condition-Based Monitoring and Prognostic Health Management of Electric Machine Stator Winding Insulation | Andrew S. Babel, Elias G. Strangas | Michigan State University | United States | | 09:00 | GD-002429 | Experimental Study of Mechanical Faults in Induction Motors through Thermography | Armando G Garcia-Ramirez, Luis A Morales-Hernandez, Roque A Osornio-Rios, Arturo Garcia-Perez, Rene J Romero-Troncoso | Universidad de Guanajuato | Mexico | | 09:00 | GD-007005 | Design On-line Monitoring and Sensitive Fault Detection for Three Phase Induction Motor | D.A Asfani, H.Z Mubarok, A Mustofa, I.M.Y Negara | Institut Teknologi Sepuluh Nopember | Indonesia | | 9:00 | GD-011924 | Overvoltage Analysis at the Terminals of Rotating Diodes Bridges of Three Stages Synchronous Machine | François Biais, Marc Tunzini, Mario Martinez, Jawad Karim, Stéphane Guguen | THALES A.E.S. | France | Session : SS - The electric platform as a mean for green-shipping (1) | | 09:00 | GD-006653 | Optimal Energy Management Control Scheme for Fuel cell Hybrid Vehicle | Khoudir Marouani, M.N. Sid, M. Becherif, H. Alloui | Ecole Militaire Polytechnique (EMP) | Algeria | Session : TT3 - Electrical drives (20) | | 09:00 | GD-010065 | Prediction of Efficiency-optimized Salient-pole Synchronous Machines' Operating Range Using a Coupled Numerical-Analytical Method | Olga Korolova, Peter Dück, André Brune, Jonathan Jürgens, Bernd Ponick | Institute for Drive Systems and Power Electronics, Leibniz University Hannover | Germany | | 09:00 | GD-010014 | Electromagnetic Design and Analysis of a Salient-Pole Synchronous Machine with Tooth-Coil Windings for Use as a Wheel Hub Motor in an Electric Vehicle | Jonathan Juergens, André Brune, Bernd Ponick | Leibniz Universität Hannover, Institute for Drive Systems and Power Electronics | Germany | | 09:00 | GD-009938 | Calculating the Steady-State Torque of PM Machines using the Cross-Correlation of Stator and Rotor Fields | Tobias Müller, Christian Schumann, Edgar Stein, Mario Pacas | Univertiy of Applied Sciences Kaiserslautern | Germany | | 09:00 | GD-012297 | Comparison of a 5MW Permanent Magnet Assisted Synchronous Reluctance Generator with an IPMSG for Wind Application | Poopak Roshanfekr Fard, Sonja Lundmark, Torbjörn Thiringer, Mikael Alatalo | Chalmers University of Tchnology | Sweden | | 09:00 | GD-007293 | Energy Saving during modern Lift operation | Epaminondas Mitronikas, Dionyssios Spyropoulos, Nick Papanikolaou, Emmanuel Tatakis, Nick Spyropoulos | University of Patras | Greece | | 09:00 | GD-010847 | Energy Consumption Estimation on Lift Systems: The Advantages of VVVF Drives | Athanasios Karlis | Democritus University of Thrace | Greece | | 09:00 | GD-002666 | Online Controller Modifying of a Six-Phase Induction Generator in Phase Opening Occurrence | Mehdi Taherzadeh, Sebastien Carriere, Franck Betin, Gérard André Capolino | UPJV | France | | 09:00 | GD-005878 | An Asymmetrical Six Phase Induction Machine for Flywheel Energy Storage Drive Systems | Mohamed Daoud | Mohamed Ibrahim Daoud | Qatar | | 09:00 | GD-009024 | Nine-Phase Variable Speed Drive System with Reduced Switching PWM | Zach Pan, Jouni Ikaheimo | Zach Pan | USA | | 09:00 | GD-009725 | A Voltage-Behind-Reactance Model of a Dual-Voltage Six-Phase Induction Machine | Stanko Gradev, Daniel Findeisen, Tore Toennesen, Hans-Georg Herzog | BMW Group | Germany | | 09:00 | GD-000973 | Motor-Converter Synchronization Phenomena in the Subsynchronous Cascade Drive | Ioannis Tsoumas | Siemens | Germany | | 09:00 | GD-005975 | FPGA implementation of a Deadbeat Direct Torque and Flux Control Scheme for Induction Machines | Gabriel Domingues, Francisco Márquez, Mats Alaküla | Lund University | Sweden | | 09:00 | GD-012742 | Compensation of Static End Effects in Linear Induction Motor Drives by Frequency-Adaptive Resonant Controllers | Angelo Accetta, Marcello Pucci, Alessandro Lidozzi, Luca Solero, Fabio Crescimbini | ISSIA-CNR | Italy | | 09:00 | GD-009946 | A Flux-Weakening Predictive Control Algorithm for Extended Constant-Power Operation of Surface-Mounted PM Machines | Alessandro Serpi | Department of Electrical and Electronic Engineering, University of Cagliari | Italy | | 09:00 | GD-006947 | An Advanced Lifetime Prediction Method for Permanent Magnet Synchronous Machines | Daniel Huger, Dieter Gerling | Universitaet der Bundeswehr Muenchen | Germany | | 09:00 | GD-010413 | Parameter identification of induction motor model by means of State Space-Vector Model Output Error Minimization | Angelo Accetta, Francesco Alonge, Maurizio Cirrincione, Marcello Pucci, Antonino Sferlazza | ISSIA-CNR | Italy | | 09:00 | GD-012203 | Design and Manufacture of Electric Powertrain and Its Cooling System for ITU EV Project | Ozgur Ustun, Murat Cakan, Nejat Tuncay, Mert Mokukcu, Cihan Kivanc, Yasar Mutlu, Gurkan Tosun | Istanbul Technical University, Electrical Engineering Dept. | Turkey | | 09:00 | GD-011444 | Automotive Brushless Motor Powered by Fuel Cell | Valeria Boscaino, Rosario Liga, Rosario Miceli, Calogero Cavallaro, Angelo Raciti | University of Palermo | Italy | | 09:00 | GD-000175 | Teaching Lab on the DSP Implementation of the Speed Control of a DC Machine | André Hodder, Timothé Maendly, Basile Kawkabani | EPFL | Switzerland | | 09:00 | GD-010561 | Predictive Control for a PMSM with LC-Filter and a Virtual Multilevel Inverter | Marcelo Pozo, Mario Pacas | University of Siegen | Germany | Session : TT7 - Grid Connected or emergency applications (2) | | 09:00 | GD-011606 | Effects of Load Variation on a Weak Grid under Unbalanced Voltage Conditions | Akrama Khan, M.Azeem Khan, Paul Barendse | University of Cape Town | South Africa | | 09:00 | GD-002496 | Fatigue Strength Prediction of Power Module for New Type of Brushless Doubly-Fed Induction Generator: Rotary Converter Generation System IV | Daichi Kawamura, Shigeki Sekine, Nobuhiro Kusuno, Masahiro Hori, Daisuke Satoh, Mamoru Kimura | Central Research Laboratory, Hitachi, Ltd. | Japan |
|
Edit in Browser | /_layouts/images/icxddoc.gif | /icem/program/_layouts/formserver.aspx?XsnLocation={ItemUrl}&OpenIn=Browser | 0x0 | 0x1 | FileType | xsn | 255 | Edit in Browser | /_layouts/images/icxddoc.gif | /icem/program/_layouts/formserver.aspx?XmlLocation={ItemUrl}&OpenIn=Browser | 0x0 | 0x1 | ProgId | InfoPath.Document | 255 | Edit in Browser | /_layouts/images/icxddoc.gif | /icem/program/_layouts/formserver.aspx?XmlLocation={ItemUrl}&OpenIn=Browser | 0x0 | 0x1 | ProgId | InfoPath.Document.2 | 255 | Edit in Browser | /_layouts/images/icxddoc.gif | /icem/program/_layouts/formserver.aspx?XmlLocation={ItemUrl}&OpenIn=Browser | 0x0 | 0x1 | ProgId | InfoPath.Document.3 | 255 | Edit in Browser | /_layouts/images/icxddoc.gif | /icem/program/_layouts/formserver.aspx?XmlLocation={ItemUrl}&OpenIn=Browser | 0x0 | 0x1 | ProgId | InfoPath.Document.4 | 255 | View in Web Browser | /_layouts/images/ichtmxls.gif | /icem/program/_layouts/xlviewer.aspx?listguid={ListId}&itemid={ItemId}&DefaultItemOpen=1 | 0x0 | 0x1 | FileType | xlsx | 255 | View in Web Browser | /_layouts/images/ichtmxls.gif | /icem/program/_layouts/xlviewer.aspx?listguid={ListId}&itemid={ItemId}&DefaultItemOpen=1 | 0x0 | 0x1 | FileType | xlsb | 255 | Snapshot in Excel | /_layouts/images/ewr134.gif | /icem/program/_layouts/xlviewer.aspx?listguid={ListId}&itemid={ItemId}&Snapshot=1 | 0x0 | 0x1 | FileType | xlsx | 256 | Snapshot in Excel | /_layouts/images/ewr134.gif | /icem/program/_layouts/xlviewer.aspx?listguid={ListId}&itemid={ItemId}&Snapshot=1 | 0x0 | 0x1 | FileType | xlsb | 256 |
|
|